November 2023 Plenary Session – Maintenance TG Agenda
All attendees are expected to familiarize themselves with the Working Group Policies and Procedures at http://1.ieee802.org/rules/ before participating in the meeting (or meetings) to be held based on the present notice, and to act accordingly. By participating in this meeting (or meetings), attendees agree to comply with all applicable laws and with the IEEE Codes of Ethics and Conduct and all IEEE policies and procedures including, but not limited to, the IEEE Patent Policy and IEEE SA Copyright and Participation Policies as provided in http://www.ieee802.org/1/files/public/templates/admin-TG-intro-0323-v01.pdf.
Chair to advise:
- IEEE’s Patent Policy is described in Clause 6 of the IEEE SA Standards Board Bylaws.
- Early identification of patent claims which may be essential for the use of standards under development is strongly encouraged.
- There may be Essential Patent Claims of which IEEE is not aware. Additionally, neither IEEE, the WG, nor the WG Chair can ensure the accuracy or completeness of any assurance or whether any such assurance is, in fact, of a Patent Claim that is essential for the use of the standard under development.
- IEEE SA’s copyright policy is described in Clause 7 of the IEEE SA Standards Board Bylaws and Clause 6.1 of the IEEE SA Standards Board Operations Manual.
- Any material submitted during standards development, whether verbal, recorded, or in written form, is a Contribution and shall comply with the IEEE SA Copyright Policy.
The Maintenance Task Group agenda typically gives precedence to formally submitted maintenance requests on published standards, approved projects, Project Authorization Request (PAR)/Criteria for Standards Development (CSD) development previously approved by 802.1, and other matters arising, in that order.
Requests for agenda items or time to present should be emailed to the Working Group Vice-Chair. Each presentation must be uploaded to the 802.1 file server and accessible to meeting attendees before the presentation begins.
The 802.1 calendar (will) include(s) access details for these meetings. Times for discussion of specific subjects are subject to change, and will be reviewed at the start of plenary and interim sessions, do not use to plan your meeting attendance without further consultation.
Mixed-mode meeting guidelines:
- Please RECORD YOUR ATTENDANCE via IMAT during the time interval announced for the meeting. This is essential for minute taking.
- Please mute yourself when you are not speaking
- When signing into Webex for the first time (see the instructions on slide 6), please provide your first and last name followed by your affiliation e.g. in [square brackets] as in e.g. John Smith [Plumbers Co.]
- Please put / remove yourself into the queue “at the mic” in the chat window, e.g.: “+q” or “-q”.
Agenda: Tuesday Nov 14 2023 meeting – 8:00-10:00 HST
Registration fee required for attending this meeting in-person or remotely
Logistics
- Location: Lehua Suite
- WebEx: Link
- Meeting number (access code): 2337 968 5276
- Meeting password: Honolulu
- IMAT: Link
Agenda
- Meeting introduction
- Approval of agenda
- Maintenance Project Status
- Review of Maintenance Motions from July 2023
- Sent liaison responses to ITU-T JCA, ITU-T SG15, and ISO/IEC JTC1/SC6
- 802 PARs Under Consideration
- Liaison Activity – Karen Randall
- Incoming
- Introduction to Ultra Ethernet Consortium (UEC) – liaison from IEEE 802.3
- IETF MADINAS documents for comment:
- Outgoing
- TBD
- Incoming
- P802.1ASdr Comment resolution – Silvana Rodrigues
- P802.1Q-2022 Rev – Mick Seaman
- SC6 Status – Karen Randall
- Outgoing
- may draft responses to ballot comments received on Committee Internal Ballot (CIB) of IEEE 802.1Qcz and IEEE 802.1AEdk (ballots close 12 November)
- Send drafts to SC6 for information when SA ballot starts (IEEE P802.1Qdj)
- Send standards to SC6 for adoption when published (IEEE 802.1 ASdr)
- Outgoing
- New Maintenance Requests
- Existing Maintenance Requests (Updated)
- 0301: ieee8021QBridgeStaticUnicastReceivePort and ieee8021QBridgeStaticMulticastReceivePort – Norm Finn (Qcw/d2.0)
- 0309: Preemption in 802.1Q – Johannes Specht
- 0310: Preemption in 802.1AC – Johannes Specht (Waiting for 802.1AC)
- 0312: StreamID as a key for YANG lists – Don Fedyk
- 0343: Handling of stream_handle in Active Stream – Max Turner
- 0362: IEEE 802.1AS Revision Request on invoking the MDpDelay Sms w/o CMLDS – Max Turner
- 0363: IEEE 802.1Q-2022 maximum SDU size – Christian Boiger
- 0364: Stream split table in IEEE 802.1CBcv-2021 FRER – Josef Dorr
- Existing Maintenance Requests (Original)
- 0242: IEEE Std 802.1Qcp-2018: Collected YANG issues – Johannes Specht
- 0248: Managed objects for ECP in 802.1Q-2018 – Norman Finn (balloted in P802.1Qdd)
- 0312: StreamID as a key for YANG lists – Don Fedyk
- 0314: network media and PHY – Johannes Specht
- 0324: Use of Tick in List Execute state machine (next Q-Revision)
- 0340: Misleading details on ATS MaxResidenceTime (next Q-Revision)
- 0342: StreamID, StreamID Group, StreamID TLV (next Q-Revision)
- 0343: Handling of stream_handle in Active Stream – Max Turner
- 0344: Handling of R-TAG in IP Stream Identification (no vehicle currently)
- 0352: “when” statements in augments should use derived-from-or-self (no vehicle currently)
- 0353: update to yang 1.1 so “when” statements in augments can use derived-from-or-self (no vehicle currently)
- 0360: syncReceiptTimeout and announceReceiptTimeout need range specified (IEEE P8021.ASdm/d1.1)
- 0361: Add a managed object to control the use of signal (IEEE P8021.ASdm/d1.0)
- 0362: IEEE 802.1AS REVISION REQUEST on Invoking the MDpDelay SMs w/o CMLDS (Max Turner, P802.1ASdm/D1.2 ballot comments).
- 0363: IEEE 802.1Q-2022 maximum SDU size – Christian Boiger
- 0364: Stream split table in IEEE 802.1CBcv-2021 FRER YANG – Josef Dorr
- Any Other Business