Maintenance TG Electronic Meeting Agenda – October 17, 2023
All attendees are expected to familiarize themselves with the Working Group Policies and Procedures at http://1.ieee802.org/rules/ before participating in the meeting (or meetings) to be held based on the present notice, and to act accordingly. By participating in this meeting (or meetings), attendees agree to comply with all applicable laws and with the IEEE Codes of Ethics and Conduct and all IEEE policies and procedures including, but not limited to, the IEEE Patent Policy and IEEE SA Copyright and Participation Policies as provided in http://www.ieee802.org/1/files/public/templates/admin-TG-intro-0323-v01.pdf.
Chair to advise:
- IEEE’s Patent Policy is described in Clause 6 of the IEEE SA Standards Board Bylaws.
- Early identification of patent claims which may be essential for the use of standards under development is strongly encouraged.
- There may be Essential Patent Claims of which IEEE is not aware. Additionally, neither IEEE, the WG, nor the WG Chair can ensure the accuracy or completeness of any assurance or whether any such assurance is, in fact, of a Patent Claim that is essential for the use of the standard under development.
- IEEE SA’s copyright policy is described in Clause 7 of the IEEE SA Standards Board Bylaws and Clause 6.1 of the IEEE SA Standards Board Operations Manual.
- Any material submitted during standards development, whether verbal, recorded, or in written form, is a Contribution and shall comply with the IEEE SA Copyright Policy.
The Maintenance Task Group agenda typically gives precedence to formally submitted maintenance requests on published standards, approved projects, Project Authorization Request (PAR)/Criteria for Standards Development (CSD) development previously approved by 802.1, and other matters arising, in that order.
Requests for agenda items or time to present should be emailed to the Working Group Vice-Chair Jessy Rouyer. Each presentation must be uploaded to the 802.1 file server and accessible to meeting attendees before the presentation begins.
The 802.1 calendar includes access details for these meetings. Times for discussion of specific subjects are subject to change, and will be reviewed at the start of plenary and interim sessions, do not use to plan your meeting attendance without further consultation.
Mixed-mode meeting guidelines:
- Please RECORD YOUR ATTENDANCE via IMAT during the time interval announced for the meeting. This is essential for minute taking.
- Please mute yourself when you are not speaking
- When signing into Webex for the first time (see the instructions on slide 6), please provide your first and last name followed by your affiliation e.g. in [square brackets] as in e.g. John Smith [Plumbers Co.]
- Please put / remove yourself into the queue “at the mic” in the chat window, e.g.: “+q” or “-q”.
Tuesday Oct 17, 2023 meeting – 11:00-13:00 ET
Logistics
- Location: Webex
- Webex: Link
- Meeting number (access code): 2343 591 2264
- Meeting password: Nu74K4BnqVE
- IMAT: Link
Agenda
- Meeting introduction
- Approval of agenda
- Update maintenance items expected to have been addressed
- Regarding 802f
- Regarding 802.1AS
- 115 correctionField (Integer64)
- 116 correctionField (Integer64)
- 117 Time-aware system requirements
- 118 Allan variance vertical axis units incorrect
- 119 BMCA – PortAnnounceInformation state machine – downgraded information
- 138 Sync messages can be sent too often
- 140 asCapable-HairTrigger
- 159 PortSyncSyncSend State Machine priority1
- 161 Minor errors and typos in 802.1AS FSMs for 802.11 links
- Regarding P802.1ASdm
- 263 802.1AS-2020: Number of TLVs in one Signaling message and TLV lengths shown in table 10-13
- 278 Inconsistent Clause 5 and PICS with respect to state machines
- 279 externalPortConfiguration should be externalPortConfigurationEnabled
- 281 “Delay_Req” should be “Pdelay_Req”
- 283 Choose appropriate “domain number” or “domainNumber”
- 289 Several references to 11.2.13 need to be removed
- 292 gPTP Communication Path should be gPTP communication path
- 293 LogAnnounceInterval needs to be logAnnounceInterval
- 294 Transmit ptpTimescale for domain 0 as TRUE and ignored on receipt
- 297 Editorial corrections for readability
- 307 IEEE 802.1AS-2020: Undefined variable portEnabledOper should be portOper
- 308 IEEE 802.1AS-2020: Inverted oneStepTxOper flag in Figure 11-7
- 327 Remove undefined variable domainEnabled in Figures 10-21 and 10-22
- 328 Incorrect comment in pseudocode of Interval Setting State Machines
- 331 Incorrect value for the meanLinkDelay when CMLDS is used
- 332 NewInfo not set TRUE in PortStateSettingExt state machine
- 334 Error in clockSourcePhaseOffset Computation in ClockMasterSyncOffset State Machine
- 335 Clarification of difference between currentTime and localTime in 802.1AS
- Regarding 802.1BR
- 300 Remove 802.1D references from 802.1BR
- Regarding 802.1CS-2020/Cor1
- Regarding 802.1Qcw
- 211 AdminCycleTime and Interval max values
- 223 Maintenance Request: IEEE8021-SRP-MIB inappropriate SYNTAX for ieee8021SrpStreamDataFramePriority
- 225 Addendum to Maintenance Request 0223: IEEE8021-SRP-MIB inappropriate SYNTAX for ieee8021SrpStreamDataFramePriority
- 230 802.1Qcp-2018 maintenance: Incorrect traffic-class-table-grouping
- 247 802.1Qcp-2018: Missing copyright release for YANG modules
- 249 Ambiguity in 802.1Qcc TSpec parameter MaxFramesPerInterval
- 264 Erronous xpath statements
- 266 802.1Q-2018 12.29.1.2.1 GateControlEntry
- 267 AdminCycleTime and Interval max values for PSFP
- 268 Maintenance Request: IEEE8021-SRP-MIB SMIv2 compliance and IEEE8021-ST-MIB typo
- 269 Missing parameter intervalOctetMax in Clause 12.31.3.2.2
- 301 ieee8021QBridgeStaticUnicastReceivePort and ieee8021QBridgeStaticMulticastReceivePort
- 304 IEEE8021PriorityCodePoint misnamed
- P802.1ASdr/D1.2 comment resolution – Silvana Rodrigues
- Any Other Business
- Future meetings